Press Fittings from M-Press
For those press virgins, here is an introduction to M-Press press fittings and the enormous advantages this product can offer installers. For many years pipework installations were completed using welded or threaded products and by either of these methods, installations were long-winded.
Press installations can cut install times considerably as all you require is a press machine with the correct jaws and basic instructions on M-Press press fittings which, are simply called M-Profile (for press training, contact our sales team). To clarify this, many of our competitors provide other manufacturers of M-Profile press products. These can be Geberit, Sanha, Yorkshire and Isotubi to name a few, they all require an M-Profile press machine.
Press is a crimped fitting connected to a tube by exerting the correct force on the fitting and can provide long warranties for your customer. The system is 16 bar rated and can be quickly and efficiently installed, as the pipe and fittings are lightweight, it also reduces costly pipework support systems. 108mm stainless steel press tube weighs only 5.3kg per metre as opposed to 114.3 od schedule 40s which weighs over 16kg per metre.
M-Press press fittings are available from a few sources across the United Kingdom and if you are looking for a Northern or Manchester Distributor. Look no further than valvestubesfittings.com and Besseges (Valves, Tubes & Fittings) Ltd. We carry stock of the full range in sizes from 15mm to 108mm in stainless steel and carbon steel from 15mm to 54mm; copper is available in sizes from 15mm to 108mm which includes 67mm. This simple but reliable pipework system can be installed a great deal faster than many traditional pipework methods and if done correctly will give decades of leak-free service.
We are not limited to 15mm to 108mm sizes, these are just the sizes we carry here on the shelf in Ashton-under-Lyne. The stainless steel M-Press press fittings system can be found in sizes up to 168mm and is efficiently pressed by the NovoPress XL press tool for larger bore. Copper Press is available in 15mm to 108mm, it can be an expensive alternative compared to the same range in stainless steel. The carbon steel press fittings range from M-Press can be found in sizes from 15mm to 108mm and is readily available.
Press Fittings M-Press Stainless Steel
Press fittings from M-Press in stainless steel can be used on a wide range of mediums across many industries. The gas press fittings range is approved for use in the United Kingdom for LPG and natural gas, the press fittings pipe is heat-marked DVGW and the fittings have gas-approved seals. Although our range of stock of complete fittings is at present limited we do carry gas seals for all the sizes we have on the shelf. For potable water installations, the stainless steel press tube is heat marked WRAS approved and the fittings are approved with standard EPDM seals.
This range can be delivered to any site in the UK or in Europe if required at very competitive rates. Deliveries outside the United Kingdom are subject to our terms and conditions and could incur extra carriage costs and import taxes where applicable. To discuss this, take the time to contact our experienced sales team, who can also make recommendations on the correct use of material and seals. Press fittings from M-Press are provided with a leak path to ensure that installations can be tested and completed correctly.
Press Fittings M-Press Copper
We provide copper press fittings and table X copper tubes from stock here in Ashton-under-Lyne. Sizes carried are 15mm to 67mm and 76mm, these sizes are where this range ends, for sizes from 108mm to 168mm we can offer 316 stainless steel as an alternative. Copper pipes and fittings are WRAS-approved products and can be used on potable water systems. Like the stainless steel range, we can offer 15mm to 54mm copper gas pipe and fittings and carry the gas seals in stock when required. The maximum temperature associated with this product is dictated by the seals installed, maximum pressure for this system is 16 Bar, for higher pressures we have alternative product lines.
O-Ring Temperature Table
EPDM Black: -10°C – 110°C
FPM/FKM Green: -30°C – 180°C
HNBR (Gas) Yellow: -20°C – 70°C
A note to all users of press fittings for all the various systems available, carbon steel pipe and fittings are not suitable or approved for gas installations.
Press Fittings M-Press Carbon Steel
Carbon steel press fittings and pipes are suitable for a more limited range of installations than the more versatile stainless steel and copper systems. If time is the prevailing factor for using M-Press press fittings, then other materials are usually a better option than a carbon steel install. Carbon steel press fittings are available in sizes 15mm to 54mm from stock and 108mm on a slightly longer delivery. Carbon steel has been used in the main heating systems in public buildings and by some businesses when installing compressed air systems.
When choosing carbon steel press fittings to complete a heating system, the manufacturer’s recommendations must be completely adhered to. Non-compliance with these specifications is likely to void any warranty provided. It is our experience that when installing insulation on carbon steel press systems; it should be a system that provides a permeable membrane. One that allows moisture to escape and prevents the ingress of moisture from the atmosphere. For more information please contact our technical sales team, to discuss your requirements.
Carbon steel press fittings on compressed air systems are possible if the carbon steel pipe provided is zinc-coated internally and externally. For peace of mind, we would always recommend the stainless-steel M-Press system for compressed air installations. Where carbon steel press is being used on compressed air systems; the oil content within the pipework must be considered when using standard black EPDM seals. If the oil content exceeds the maximum stated by the manufacturer; the seals can expand which could result in leaks from joints. The complete guide to M-Press press fittings can be found by following the link to our website or by contacting our sales team.
Press Fittings M-Press Warranties
M-Press offers excellent warranties across the entire press fittings range of products, giving installers and end users peace of mind. The system offered contrary to some of our competitors’ representatives has the same approvals overall as all major press fittings suppliers and manufacturers. Product warranties are subject to the manufacturer’s terms and conditions; and of course, abiding by the manufacturer’s installation guides and instructions.
If you are unsure of the correct procedures for installing press fittings, contact us and we can arrange training for United Kingdom businesses. The training offered by M-Press usually takes around an hour per session and is done under normal circumstances over two sessions. Each person who attends the training session is issued with an attendance certificate, which can be added to an installer’s file.
Press Fitting M-Press Warranty:
Stainless Steel Press Fittings: 40-Year Installed Warranty
Copper Press Fittings: 30-Year Installed Warranty
Carbon Steel Press Fittings: 25-Year Installed Warranty
When installing any press fittings, the press tools should have current certification. For information on certifying your press tool please contact our sales team and they will provide you with your nearest outlet that can offer this service; we look forward to hearing from you.
Disclaimer: Information correct at the time of publishing (May 2018) but is subject to change. Last Reviewed: November 2024. E&OE.
Register for an account today
Get instant access to our extensive product range